Water soluble stabilizers are the most common type

Water soluble stabilizers are the most common type used in machine embroidery. They are also the only type of stabilizer that can be used as a base fabric without any additional materials.

PVA is one of the most important biodegradable synthetic resins derived from petroleum-based sources; it is flexible, transparent, non-toxic, and biocompatible. However, due to the presence of hydrophilic hydroxyl groups in the side chain of PVA resin, when placed in humid or water environments, it will swell or dissolve; therefore, it needs to be modified for water resistance.

Adhesive Stabilizer

PVA Water Soluble Embroidery Backing Film Stabilizer is one of the most common stabilizers used in machine embroidery. It is often referred to by different names: water soluble stabilizer, water soluble topping, wash away stabilizer, aqua film standard, and more.

The name is based on its ability to dissolve in water without leaving any remnants behind. It is especially useful when a tearaway or cut away stabilizer won't work with a particular fabric, such as heirloom dresses or delicate fabrics.

It is also an excellent base stabilizer for thread painting projects, as it provides a firm foundation for your stitches and won't build up under dense stitches. This can be particularly helpful when embroidering free-standing lace or certain patches.

When you purchase a water-soluble stabilizer, be sure to read the specifications carefully, as they may include important information such as how long it takes for the stabilizer to dissolve in water and at what temperature. This will help you to choose the right stabilizer for your next project.

Iron-On Stabilizer

If you want to embroider on fabric that has a nap or raised fibers, it is important to use stabilizer. This can eliminate puckering and give you a more uniform look in the end.

There are a few different types of stabilizers available that can be used in machine embroidery. These include tear-away, wash-away and heat-away stabilizers.

Tear-away stabilizer is designed to be removed after stitching, preventing tunneling and distortion of the stitches. These stabilizers are usually a heavier weight than a water-soluble stabilizer, and can be purchased in various thicknesses.

Wash-away stabilizer is perfect for high-pile fabrics, eliminating the tendency for stitches to get lost in the fabric nap. These stabilizers can be removed by running water or soaking in water and rinsing away after the embroidery is finished.

Water-Soluble Stabilizer

A water-soluble stabilizer is a backing that is dissolved in water. You use this type of stabilizer as a topper or a backing for embroidery projects. It's a lightweight, tear-away, webbing-like stabilizer that is pressed to the fabric before or after embroidery.

It is used to prevent stitches from getting lost in textured fabrics, for example, knitted garments and terry cloth. It also works well on piled fabrics.

This water-soluble stabilizer is a great alternative to tear-away and cut-away stabilizers. It's perfect for projects that are too delicate or sheer to work with a tear-away or cut-away stabilizer.

Some manufacturers' wash-away resembles a non-woven interfacing, whereas others are like a thick film that you can hoop and then dissolve in water. You'll find that this stabilizer is particularly useful for embroidering on lace or organza, since it doesn't stiffen like a film. It's also a good choice for projects on see-through fabrics. It will last a long time under normal temperature conditions.

Paper Stabilizer

This type of stabilizer is great for embroidery on terrycloth and knitwear. It can be applied over the fabric and then a light misting of water will dissolve it leaving the work neat and clean.

Another advantage of this type is that it can be easily removed later if you are preparing your work for washing. Some of these products also have a tear away feature that will help you get rid of the leftovers after the project is complete.

The most common use of this kind of stabilizer is for freestanding lace embroidery. It is a great choice when the lace needs a lot of support and is not going to be washed often.

Stabilizers can be used with all types of embroidery. Choose the one that works best for your specific project and fabric. It is important to consider the size of the design, density and number of stitches, background fabric, thread type and stitching style.